One way to program a Motorola MAXTRAC is to use a older slower computer with a serialport on it.
Another way is to use DOSBox to emulate a computer running DOS, it is also possible to emmulate a slow computer.
The genuine Motorola Radius GP300 Programming Software is available to download from our website. Supported Operating Systems: The Motorola Radius GP300 was designed to be programmed using MS DOS. In order to program a Motorola Radius GP300 or Motorola Radius GP350, you will need to either have a computer with a COM port and MS DOS or Windows 95/98 With MS DOS prompt. RADIUS RADIO SYGNALLING CODEPLUG AVN6016A. To analyze or program the radius radio signalling codeplug via an ibm pc and an ep232 programmer. PC6296 Programming Tool v3.3. Works with CP6272 program. Repeater Card, BASE STATIONS: MOTOROLA & ERICSSON PC6847 PROGRAMMING TOOL FOR CP6295-TE REPEATER.
Motorola Radius Gp300 Programming
Motorola Radius Gm300 Radio Doctor
I did this from a PIII Laptop @ 1Ghz running Windows XP, but other operating systems are also possible to use, but in some cases these instructions needs to be modified.
Radius (GM300) M120 User Manual 6880902Z97 1.33 MB PDF file Radius (GM300) M120 Service Manual 6880902Z98-O 7 MB PDF Donated by Eric Lemmon WB6FLY This is a 2-channel Radius GM300 that uses the 8-channel masked logic board. The manual includes revisions MMR-077, MMR-100, and MMR-104. 647 Blackhawk Drive Westmont, IL 60559. 800.248.5391 Toll Free 630.325.2700 Phone motorola@acsradios.com. Hours of Operation 8:00 a.m.
And NO, I will not give you a copy of the RSS so don’t bother asking for it.
Motorola Radius Gm300 Receive Issues
- Start with setting up DOSBox so you can access the serial port you wish to use. I set it up to map the usb->serial adapter that windows gave com34 as com1 in DOSBox
- Create a shortcut to the Motorola MAXTRAC RSS software like
- And now we are done and can use the software to program the radio
- If you are getting errors and belive these are based on DOSBox being to fast, you can slow it down by adjusting the cycles value in the config file or you can use crlt+F11 to slow it down when it is running